h2t
Pumpkin Peel Body Treatments
Start
the service with the client laying on his/her front.
Cleanse entire body with (h2t) Shower Gel, rinse with
warm towels.
Use
a soft bristle brush when applying the h2t Pumpkin Peel
treatment. Apply with long soothing strokes covering the
entire area with the formulation.
Using
the 20% h2t Pumpkin Peel formulation, apply products
starting with the feet and moving up to the top of the
body.
Wrap the
client. Allow the client to rest for no longer than ten
minutes. Do not use thermal blanket as the heat will add
to potential irritation.
Note: Tingling will occur. If tingling becomes
intolerable or if irritation occurs- discontinue use.
Remove
h2t Pumpkin Peel treatment with tepid to cool water.
Starting with arms and back working toward feet. Skin
should have a healthy stimulated glow. Apply a soothing
post treatment and (h2t) Body Moisturizing Complex.
Allow
the client to turn over onto his/her back. Apply Pumpkin
Peel starting with the feet and work the application process
toward the head.
When
applying h2t Pumpkin Peel to decollate and face, you may
want to decrease the potency down to 5-8% for
sensitivity purposes.
Once
again, wrap client and allow a resting period of no
longer than 10 minutes.
Remove
Pumpkin Peel treatment with cool, wet towel starting with neck and decollete.
Customized h2t Pumpkin Peel Treatment
You may
use the Pumpkin Peel as part of an exfoliation process
or as a customized treatment to any facial procedure.
Custom blend the Pumpkin Peel; potency of treatment will
be decided based on sensitivity of the skin, tolerance
level of glycolic acids, or both.
Always start with a lower concentration. This allows a
tolerance to be built. As further treatments are given,
an increase in potency may be used based on sensitivity
and desired results.
Apply 1/2
to 1 tsp. of Pumpkin Peel to the face starting with the
thicker areas of the skin (chin, forehead, outline of
face, cheeks) Avoid contact with eyes.
Allow
Pumpkin Peel treatment to initially stay on 1-3 minutes or until
redness (erythema) occurs. As client receives repeated
treatment, the time may be increased progressively up to
10 minutes. (Do not build up the concentrations and/or
time until the skin can tolerate it.)
Remove
with cool water starting with the thinner areas of the
skin. Apply a post nourishing mask.
Manicure with
h2t Pumpkin Peel
Starting with Pumpkin Peel:
Remove
polish, shape or file nails.
Apply Pumpkin Peel to the top of the hand only, leave on
for 5 minutes.
After 5
minutes, remove Pumpkin Peel with a warm wet cloth, then
proceed with manicure.
Finishing with Pumpkin Peel:
Remove
polish, shape or file nails, soak and trim cuticles.
Apply
Pumpkin Peel to the top of the hand only, leave on for 5
minutes.
After 5
minutes, remove Pumpkin Peel with a warm wet cloth, then
proceed with manicure.
Dry
hands, massage, clean nail plate and apply polish.
Pedicure with h2t Pumpkin Peel
Starting with Pumpkin Peel:
Lightly
apply Pumpkin Peel with a brush to the top of foot. Then
more generously to the bottom and sides of foot where
callous can occur.
Leave
on for 5 minutes, rinse with warm water.
Start with the coarse side of foot file, concentrating
on heavily calloused areas. Finish with finer side of
foot file.
Exfoliate and massage the foot using (h2t) Total Body
Sugar Buff, rinse with warm water.
Finishing with Pumpkin Peel:
Using
the coarse side of a foot file, concentrate on heavily
calloused areas. Finish with finer side of foot file.
Exfoliate and massage the foot using (h2t) Total Body
Sugar Buff, rinse with warm water.
Lightly
apply pumpkin peel with a brush to the top of foot. Then
more generously to the bottom and sides of foot where
calluses can occur.
Leave
on for 5 minutes, rinse with warm water.
